Whole house customized size measurement is a key step in ensuring that customized products are accurately adapted to home spaces. Accurate measurement can avoid many problems during subsequent installation and use. The following is a detailed introduction to customized measurement dimensions for the entire house:

Preparation before measurement

Tool preparation: Prepare professional measuring tools, such as laser rangefinders, which can quickly and accurately measure distance with minimal error; A tape measure is also an essential tool, which can be used for positions that are difficult to measure with laser rangefinders or as an auxiliary measurement; Additionally, paper and pen are required to record measurement data.

Communication requirements: Fully communicate with the whole house customization designer or merchant to clarify the type of customized product (such as wardrobe, cabinet, tatami, etc.), functional requirements (such as hanging and stacking area planning inside the wardrobe), and special requirements (such as reserved space for embedded appliances, etc.), so as to focus on relevant dimensions during measurement.

Cleaning up the site: Clean up the debris in the measurement area, ensure that the ground and walls are flat and unobstructed, so that the dimensions of each part can be accurately measured.

Key points of different spatial measurements

bedroom

closet

Width measurement: Measure the width of the wall where the wardrobe is installed, from one corner of the wall to the other, multiple points should be measured, and the minimum value should be taken as the width dimension of the wardrobe to ensure smooth installation and fit with the wall.

Height measurement: Measure the vertical height from the ground to the ceiling, using multiple points to consider whether the ground and ceiling are flat, and take the minimum value. If the room has a ceiling, it is necessary to clarify the connection between the top of the wardrobe and the ceiling, whether it should be below or level with the ceiling.

Depth measurement: Measure the distance from the installation position of the wardrobe to the opposite wall, while considering the opening method of the wardrobe door. For example, a swing door requires sufficient opening space, and the depth of the wardrobe is generally around 550-600mm.

bed

Bed size: Determine the size of the bed based on the bedroom space and personal needs (such as 1.2m, 1.5m, 1.8m, etc.), measure the length and width of the bed placement position, and reserve sufficient activity space. Generally, at least 500-600mm of passage should be left on both sides of the bed.

Bedhead background wall: If you want to customize a bedhead background wall, you need to measure its height, width, and relative position to the bed to ensure that the size and style of the bedhead background wall match the bed.

kitchen

cupboard

Length and width measurement: Similar to the ground cabinet, measure the installation length and width of the hanging cabinet, while considering the spacing between the hanging cabinet and the ground cabinet, which is generally around 700-750mm for easy operation.

Height measurement: Determine the installation height of the suspended cabinet by measuring the vertical height from the top of the cabinet to the ceiling, ensuring that the cabinet does not touch the ceiling and is easy to use.

Length measurement: Measure the installation length of the floor cabinet along the kitchen wall, paying attention to deducting the space occupied by doors, windows, pipes, etc.

Width measurement: Measure the depth of the cabinet. The standard depth is generally 600mm, but if the kitchen space is limited, it can also be adjusted according to the actual situation.

Height measurement: Determine the height of the cabinet based on the user's height. Generally, the height of the cabinet is around 800-850mm, and the flatness of the ground should be considered during measurement.

floor cabinet

wall cabinet

Reserved space for appliances: Measure the dimensions of embedded appliances such as refrigerators, ovens, dishwashers, etc., including length, width, height, and requirements for heat dissipation space, and reserve suitable installation positions for appliances.

a living room

TV cabinet

Overall size: Determine the length, width, and height of the TV cabinet based on the space size of the living room and the size of the TV. Measure the size of the TV background wall to ensure coordination between the TV cabinet and the background wall.

Internal partition size: If you want to design the internal partition of a TV cabinet for placing audio equipment, set-top boxes, etc., you need to measure the size of these devices and plan the size and layout of the partition reasonably.

Storage cabinet

Measurement position and size: Determine the installation position of the storage cabinet, measure its length, width, and height. Consider the door panel opening method and internal storage requirements of the storage cabinet, such as whether drawers, shelves, etc. need to be installed.

toilet

Bathroom cabinet

Tabletop size: Measure the length, width, and depth of the bathroom countertop, which should be determined based on the space of the bathroom and the size of the washbasin.

Cabinet size: Measure the size of the bathroom cabinet to ensure that it can be installed in the appropriate position, while considering the fit with the wall and floor.

MIRROR CABINET

Size measurement: Measure the installation position and size of the mirror cabinet. The length and width of the mirror cabinet should match the bathroom cabinet, and the height should be determined according to the user's needs and the space of the bathroom.

Special case handling

Alien Space: If encountering a space with irregular structures such as columns and beams, it is necessary to measure the dimensions of the columns and beams in detail, as well as their distance from the wall. Based on the actual situation, the shape and size of customized products should be designed to make full use of the space.

Door and window position: Measure the size, position, and opening direction of doors and windows to ensure that customized products do not affect the normal opening and closing of doors and windows. For example, wardrobes cannot block windows, and cabinet doors cannot interfere with interior doors.

Measurement records and verification

Detailed recording: During the measurement process, each measurement data should be accurately recorded, including measurement position, dimensional values, and other information. It is best to draw a simple plan and label each dimension.

On site verification: After the measurement is completed, it is necessary to verify the measurement data with the owner or relevant personnel on site to ensure that there are no omissions or errors. At the same time, explain the measurement data and customized plans to the owners, and listen to their opinions and suggestions.

Review confirmation: After returning to the company, the measurement data should be rechecked to ensure its accuracy. If necessary, professional personnel can be arranged for secondary measurement to avoid customized products being unable to function properly due to measurement errors.